Skip to Content

Jobs

MEP Site Superintendent

|  Posted On: Nov 20, 2026

location:Harrisburg, PA 17111

Duration:1 Month, Contract

mode of work:On-site

Log In and Apply

Job Summary

Job Title:  
MEP Site Superintendent
Posted Date:  
Nov 20, 2026
Duration:  
1 Month, Contract
Shift(s):  
  • 08:00 - 17:00
We care about you! Explore Rangam’s benefits information

Talk to our Recruiter

Name:
 
Meet Yadav

Email:
 
myadav@rangam.com

Phone:
 
650-516-3170

Description

Work Location: 100% on-site at a campus in Harrisburg, PA
Duration: One month with possibility that this position may extend until June 2027

Work Schedule:

  • Core working hours Monday through Friday, with regular mandatory availability for early-morning crane lifts (e.g., 5:00 AM setups), evening/night utility outages, weekend academic break work, and emergency freeze/weather response.

Position Overview

  • The MEP Site Superintendent serves as the primary on-site field leader directly responsible for the daily coordination, field craft supervision, and physical installation quality across mechanical, electrical, plumbing, and building controls scopes for the comprehensive Energy Savings Performance Contracting (ESPC) programs.
  • Operating full-time on-site within an active higher-education academic and residential campus valued in excess of $20M, the MEP Superintendent owns boots-on-the-ground field logistics, daily trade contractor performance, MEP rough-in and trim-out inspections, equipment rigging and setting, and active site safety enforcement.
  • Working in close partnership with the Senior Site Project Manager, trade foremen, and campus facilities teams, this role ensures MEP installations adhere strictly to engineering specifications, equipment submittals, manufacturer installation guidelines and code compliance.

High-Complexity Mechanical & Electrical Scopes:

  • Central Chiller Replacements: Setting and commissioning air-cooled chillers, including chilled water pipe fitting, structural dunnage, and power distribution.
  • Air Distribution & Energy Recovery: Heavy air handling unit (AHU), energy recovery unit (ERU/HRU), and pump replacements, including critical rigging and roof penetrations (e.g., crane picks).
  • Hydronics & Water Treatment: Hydronic loop chemical cleaning and flushing, Spirotherm closed-loop dirt/air separators, and temporary chilled water bypass connections.
  • Building Controls (BAS): Direct digital controls (DDC) field installations, BACnet IP/MSTP network routing, end-device wiring, and damper/valve actuator retrofits across multiple facilities.

Core Roles & Responsibilities

Field MEP Trade Coordination & Superintendent Leadership

  • Maintain continuous, full-time physical presence across active campus work areas, directly supervising all MEP trade subcontractors (Mechanical Piping, Sheet Metal/Ductwork, Electrical, Temperature Controls, Insulation, Rigging, and Test & Balance).
  • Lead daily morning field briefings and "tailgate" coordination huddles with trade foremen to establish daily work areas, track manpower counts, synchronize shared work spaces, and resolve trade collisions.
  • Conduct weekly formal on-site MEP subcontractor coordination meetings; drive trade accountability regarding craft productivity, sequence of work, and equipment deliveries.

Technical Quality Assurance / Quality Control (QA/QC) & Code Compliance

  • Inspect all mechanical piping installations prior to insulation and concealment, verifying pipe routing, slope, pipe hanger spacing, dielectric unions, weld quality, and hydrostatic pressure testing.
  • Verify sheet metal and ductwork installation integrity, including SMACNA duct leakage testing, fire/smoke damper installations, access door placements, and seismic/vibration isolation hanging.

Safety, High-Risk Work Execution & EHS Leadership

  • Enforce an uncompromising zero-incident culture across every mechanical room, roof, tunnel, and interstitial space, adhering to Client EHS policies, OSHA standards, and DEB safety mandates.
  • Review, sign off, and audit daily Subcontractor Job Hazard Analyses (JHAs) and Pre-Task Plans (PTPs) before work begins each morning.
  • Critical Rigging & Crane Operations: Validate crane lift plans, ground bearing/outrigger matting, street closure permits, pedestrian detours, and exclusion zones during chiller and rooftop AHU picks.
  • Lockout/Tagout (LOTO): Verify and witness primary zero-energy state isolation across high-voltage electrical switchgear, medium/high-pressure steam systems, hydronic pumping loops, and natural gas lines.
  • Roof & Leading-Edge Safety: Enforce active 100% tie-off, certified anchor points, warning lines, and hole covers during rooftop equipment sets and flashing tie-ins.

Look-Ahead Scheduling, Utility Outages & Shutdown Planning

  • Build and drive the rolling 3-Week Short-Term Look-Ahead Schedule, translating the master construction baseline into granular, day-by-day trade assignments.
  • Mastermind field execution for aggressive winter break shutdowns (December to January), ensuring multi-trade shifts hit substantial completion deadlines ahead of student re-population.
  • Coordinate comprehensive MEP utility outage requests (campus steam shutdowns, chilled water cutovers, domestic water isolated outages, and electrical switchgear cut-ins) with University Facilities Management, minimizing impact on dining, residence halls, and research environments.
  • Monitor trade material availability on-site, cross-referencing upcoming activities against long-lead equipment deliveries to mitigate field idle time.

Daily Documentation, Procore Administration & Field Engineering

  • Author and submit comprehensive Procore Daily Logs at the end of each shift, documenting weather conditions, exact craft headcounts by trade, equipment on-site, progress made per building, daily deliveries, and active site photos.
  • Identify existing-building conditions that diverge from contract drawings; draft clear, field-dimensioned Requests for Information (RFIs) in Procore to obtain timely design clarification from engineering partners.

Equipment Start-Up, Pre-Commissioning & Punch List Closeout

  • Coordinate factory-authorized equipment start-ups (chillers, boilers, pumps, rooftop units, and variable frequency drives) alongside certified manufacturer technicians and commissioning agents.
  • Direct the hydronic pipe flushing and chemical passivating process, verifying clean strainer checks, differential pressure readings, and water quality testing before tying into central distribution mains.

Qualifications & Skill Requirements

Education & Trade Experience

  • High School Diploma / GED required; Bachelor’s Degree in Construction Management, Mechanical Engineering, or Building Construction is an asset.
  • 10+ years of hands-on mechanical/MEP field supervision experience, with at least 5–7 years serving as a Lead Site Superintendent on large commercial, institutional, or university mechanical retrofit projects ($10M+).
  • Prior field experience with Energy Savings Performance Contracting (ESPC / GESA / VEP) or design-build mechanical contracting is strongly preferred.
  • Journeyman or Master Tradesman license (HVAC/Mechanical, Plumbing, or Electrical) is highly desirable.

Certifications & Credentials

  • OSHA 30-Hour Construction certification required (current within past 3 years).
  • First Aid / CPR / AED certification required.
  • Rigging & Crane Signaling Certification (NCCCO or equivalent qualified rigger/signaler) strongly preferred.
  • Fall Protection Competent Person and Confined Space Competent Person certifications strongly preferred.
  • EPA Section 608 Universal Certification is an asset.

Working Conditions & Physical Demands

Physical Requirements:

  • Must be able to traverse a multi-building university campus on foot daily.
  • Frequent climbing of stairs, vertical ladders, roof hatches, and construction scaffolding.
  • Ability to safely navigate mechanical penthouses, crawlspaces, steam tunnels, and equipment trenches.
  • Must be able to lift and carry up to 50 lbs of test gear, tools, or equipment as needed.
  • Full PPE (hard hat, safety glasses, high-visibility vest, cut-resistant gloves, and steel-toed boots) mandatory in all designated construction zones.

 

AI-Assisted Application Screening

As part of our recruitment process, we may use automated tools or AI-enabled technologies to assist with resume screening and candidate matching. These tools help our recruitment team review applications more efficiently, but they do not make hiring decisions. All final decisions are made by human reviewers.